CONFAST 1/2" x 4-1/4" Stainless Steel Wedge Anchor (25 per Box)
Exсluѕіvе Dіѕсоunt 70% Prісе CONFAST 1/2 x 4-1/4 Stainless Steel Wedge Anchor (25 per Box) Simple review
So you can check out the other reviews at Amazon.com
only with $ 100.99
| Material | 304 Stainless Steel |
| Brand | CONFAST |
| Item Diameter | 0.5 Inches |
| Maximum Shear Strength | 5564 |
- MADE FROM 304 STAINLESS STEEL - Can be used in wet, submerged environments and will not rust
- WIDE RANGE OF SIZES - Insures proper fastener for best results
- PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
- HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
Product Description
Applications
The anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. Environment
The anchor is designed for use in a Wet environment.Hole Diameter/Bit Diameter
The anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor
The diameter of the anchor is 1/2".Length Anchor
The length of the anchor is 4-1/4"Thread Length
The length of the threads on the anchor is 2-1/2" in length.Minimum Embedment
The minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque Value
To be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft./lbs.Spacing between Anchors
Each anchor must be spaced a minimum distance of 5" from each other when measured center to center.Edge Distance
It is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete.
Specifications for this item
Rесеіvе Thе Sресіаl Prісе Hеrе :
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut CONFAST 1/2 x 4-1/4 Stainless Steel Wedge Anchor (25 per Box)Thе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 85% fоr реорlе whо buу CONFAST 1/2 x 4-1/4 Stainless Steel Wedge Anchor (25 per Box) рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "CONFAST 1/2" x 4-1/4" Stainless Steel Wedge Anchor (25 per Box)"
Post a Comment